ColorOps: Solarize In the S_ColorOps Plugin. Inverts the colors of the input clip that are brighter than the Threshold value, to create a 'solarization' effect. Inputs: Source:  The clip to be processed.

Parameters:

Threshold:   Default: 0.5,  Range: 0 or greater.
Colors above this value are inverted. If this is 0, all colors are inverted to produce a negative. If this is 1, no colors are inverted and the result should equal the input.

Brightness:   Default: 2,  Range: 0 or greater.
Scales the brightness of the result. Note that if a Threshold of .5 is used, no colors will be more than half the maximum brightness, so the contrast is increased by setting the Brightness to 2.

Offset Darks:   Default: 0,  Range: any.
Adds this gray value to the darker regions after the solarize effect. This can be negative to increase contrast.

Saturation:   Default: 1,  Range: any.
Scales the color saturation of the result. Increase for more intense colors. Set to 0 for monochrome. You can also invert the chroma of the result by making this negative.

Invert:   Check-box,  Default: off.
If enabled, the result is inverted. The invert is applied before the Brightness and Offset are used, so you may need to readjust those parameters when you change the invert option.

See Also:

HueSatBright Monochrome ClampChroma PseudoColor DuoTone TriTone QuadTone Tint Threshold Hotspots Gamma ChannelSwitcher ShowBadColors Invert

ZebrafyColor Sapphire Plug-ins Introduction

© 2010, GenArts, Inc. All rights reserved.