ColorOps: ShowBadColors In the S_ColorOps Plugin. Identifies all pixels that fall outside a given color range, and flags them with the same color so they can be seen easily. Inputs: Source:  The clip to be processed.

Parameters:

Min:   Default: 0,  Range: any.
Minimum color value. Pixels where any color channel is less than this value will be marked with Low Color.

Max:   Default: 1,  Range: any.
Maximum color value. Pixels where any color channel is greater than this value will be marked with High Color.

Min Luma:   Default: 0,  Range: any.
Minimum luminance value. Pixels where the luminance is less than this value will be marked with Low Color.

Max Luma:   Default: 1,  Range: any.
Maximum luminance value. Pixels where the luminance is greater than this value will be marked with High Color.

High Color:   Default rgb: [1 0 0].
Color to mark high pixels with. Any pixel that is above one of the Max parameters will be set to this color.

Low Color:   Default rgb: [0 0 1].
Color to mark low pixels with. Any pixel that is below one of the Min parameters will be set to this color.

Min Rgb:   Default rgb: [0 0 0].
Minimum values per color channel. Pixels where any color channel is below the corresponding channel of this parameter will be marked with Low Color.

Max Rgb:   Default rgb: [1 1 1].
Maximum values per color channel. Pixels where any color channel is above the corresponding channel of this parameter will be marked with High Color.

Min Chroma:   Default: 0,  Range: any.
Minimum chrominance value. Pixels where the chroma is less than this value will be marked with Low Color.

Max Chroma:   Default: 1,  Range: any.
Maximum chrominance value. Pixels where the chroma is greater than this value will be marked with High Color.

Output Matte:   Check-box,  Default: off.
If enabled, output a matte which is set to white for bad pixels and black otherwise.

Invert Matte:   Check-box,  Default: off.
If enabled, the matte is inverted to show black for bad pixels and white otherwise. Has no effect unless Output Matte is also enabled.

See Also:

HueSatBright Monochrome ClampChroma PseudoColor DuoTone TriTone QuadTone Tint Threshold Hotspots Gamma Solarize ChannelSwitcher Invert

Sapphire Plug-ins Introduction

© 2010, GenArts, Inc. All rights reserved.