PsykoStripes

In the S_Psyko Plugin.

Combines the source clip with a stripe pattern and then passes them through a colorization process. The Phase Speed parameter causes the colors to automatically rotate over time.

Inputs:

Source:  The clip to be processed.
        

Parameters:

Source Blur:   Default: 0.1,  Range: 0 or greater,  Shared.
If positive, smooths out the edges of the source by this amount before applying the colorization.

Source Scale:   Default: 1,  Range: 0 or greater,  Shared.
Scales the source values but not the added stripes.

Freq Colors:   Default: 3,  Range: 0 or greater.
The frequency of the color pattern. Increase for a busier texture with more cycles through the spectrum.

Freq Red:   Default: 1,  Range: 0 or greater,  Shared.
The frequency of the red color component. Increase for more cycles in the red channel.

Freq Green:   Default: 1.1,  Range: 0 or greater,  Shared.
The frequency of the green color component. Increase for more cycles in the green channel.

Freq Blue:   Default: 1.2,  Range: 0 or greater,  Shared.
The frequency of the blue color component. Increase for more cycles in the blue channel.

Stripe Dir:   Default: 45,  Range: any.
The direction of the stripes, in counter-clockwise degrees from vertical.

Stripe Mag:   Default: 0.5,  Range: 0 or greater.
The magnitude of the stripes. Increase for more cycles of the colors in the stripe direction.

Subpixel:   Check-box,  Default: on,  Shared.
Enables subpixel-width blur. Use this for smoother animation of the Source Blur parameter.

Brightness:   Default: 1,  Range: 0 or greater,  Shared.
Scales the brightness of the result.

Color:   Default rgb: [1 1 1],  Shared.
Scales the color of the result. For example, if it is yellow [1 1 0], the blue of the result will be 0.

Offset:   Default: 0,  Range: any,  Shared.
Adds this gray value to the result (or subtracts if negative). 0 has no effect, .5 is middle gray, and 1 is white.

Scale By Source:   Default: 0,  Range: 0 to 1,  Shared.
The brightness of the output is scaled down by the original source brightness as this is increased to 1.

Scale By Src Amp:   Default: 1,  Range: 0 or greater,  Shared.
This amplifies the effect of Scale By Source, so if increased above 1, the middle grays can still retain their full brightness. It has no effect unless Scale By Source is positive.

Saturation:   Default: 1,  Range: 0 or greater,  Shared.
Scales the strength of the colors. Increase for more intense colors, or decrease for muted colors.

Params2:

Phase Speed:   Default: 1,  Range: any.
The phase speed of the color patterns. If non-zero, the phase is automatically animated to give the color pattern a boiling look.

Phase Start:   Default: 0.5,  Range: any.
The phase offset of the color patterns.

Phase Red:   Default: 0,  Range: any,  Shared.
The phase offset of the red color component.

Phase Green:   Default: 0,  Range: any,  Shared.
The phase offset of the green color component.

Phase Blue:   Default: 0,  Range: any,  Shared.
The phase offset of the blue color component.

See general info for: Res, On Fields, Redraw, Undo, Load Defaults, Crop, Add Noise, and Use Gamma.


See Also:

PsykoBlobs
PseudoColor
ZebrafyColor
CloudsPsyko
Sapphire Plug-ins Introduction


© 2010, GenArts, Inc. All rights reserved.