FieldRemove: NTSCtoFilm In the S_FieldRemove Plugin. Adaptively removes video field interlacing artifacts from areas with motion, without blurring the stationary parts of the image. At the same time this converts the frame rate from 30 to 24, so you should normally set your output frame number to 4/5 of your input clip length. A 'Motion Matte' is generated internally and the moving areas are deinterlaced with the usual loss of vertical resolution, but the stationary areas of the image are not deinterlaced and should remain sharp. Inputs: Source:  The input to process. In Batch, it is recommended that this input be a clip of frames rather than another node.

Parameters:

Scale Mo Matte:   Default: 4,  Range: 0 or greater,  Shared.
Increase to remove more field artifacts, or decrease to remove fewer and keep the image sharper.

Threshold Matte:   Default: 0.05,  Range: 0 or greater,  Shared.
This value is subtracted from the Motion Matte and can be increased to reduce unwanted deinterlacing due just to noise.

Blur Mo Matte:   Default: 0.1,  Range: 0 or greater,  Shared.
Determines how much the Motion Matte is smoothed out to avoid sharp transitions between the interlaced and deinterlaced areas.

Show:   Popup menu,  Default: Result.
Selects the output option.

Result:  output the deinterlaced result normally.

MotionMatte:  this allows viewing the Motion Matte itself, and can be helpful when adjusting the other parameters above.

See Also:

FieldRemove Deinterlace DeinterlaceAuto

FieldTool GetFrame DeinterlaceAuto

Sapphire Plug-ins Introduction

© 2010, GenArts, Inc. All rights reserved.