GlowRainbowComp In the S_GlowsComp Plugin. Generates rainbow colored glows based on the distances from the edges of the source input. Any edges in the input image, where the brightness crosses the given threshold value, will generate an equal glow into the darker side of the edges. This is similar to GlowRainbow, but here the source and background can be different clips. Inputs: Front:  The clip to use as foreground. Back:  The clip to combine the glows with. Matte:  Specifies the opacities of the Front clip. These values are scaled by the Source Opacity parameter before being used.

Parameters:

Width:   Default: 0.5,  Range: 0 or greater.
Scales the glow distance. This and all the width parameters can be adjusted using the Width Widget. Note that a zero glow width still enhances the bright areas; set the brightness parameter to zero if you want to pass the Source through unchanged.

Frequency:   Default: 12,  Range: 0 or greater.
The frequency of the color pattern. Increase for more cycles through the spectrum.

Frequency Red:   Default: 1,  Range: 0 or greater.
Scales the red frequency.

Frequency Green:   Default: 0.9,  Range: 0 or greater.
Scales the green frequency.

Frequency Blue:   Default: 0.8,  Range: 0 or greater.
Scales the blue frequency.

Phase:   Default: 0,  Range: any.
Shifts the color pattern.

Phase Speed:   Default: 1,  Range: any.
If non-zero, the color phase is automatically animated at this speed, causing the color pattern to flow over time.

Phase Red:   Default: 0,  Range: any.
Shifts the red phase.

Phase Green:   Default: 0,  Range: any.
Shifts the green phase.

Phase Blue:   Default: 0,  Range: any.
Shifts the blue phase.

Brightness:   Default: 0.8,  Range: 0 or greater.
Scales the brightness of the glows.

Color:   Default rgb: [1 1 1].
Scales the color of the glows.

Threshold Add Color:   Default rgb: [0 0 0].
This can be used to raise the threshold on a specific color and thereby reduce the glows generated on areas of the source clip containing that color.

Threshold:   Default: 0.5,  Range: 0 or greater.
Glows are generated at the edges of areas in the source clip that are brighter than this value. A value of 0.9 causes glows from only the brightest spots. A value of 0 causes glows for every non-black area.

Glow Saturation:   Default: 1,  Range: 0 or greater.
Scales the saturation of the glow colors. Increase for more intense colors. Set to 0 for monochrome.

Source Opacity:   Default: 1,  Range: 0 to 1,  Shared.
Scales the opacity of the Source input when combined with the glows. This does not affect the generation of the glows themselves.

Scale Back:   Default: 1,  Range: 0 to 1,  Shared.
Scales the brightness of the background. This parameter only has an effect if the background input is provided, and is visible due to a partially transparent Source image or a reduced Source Opacity parameter value.

Params2:

Glow Under Src:   Default: 0,  Range: 0 to 1,  Shared.
Set to 1 to composite the Source input over the glows.

Glow From Matte:   Default: 0,  Range: 0 to 1,  Shared.
Set to 1 to generate glows from the alpha channel of the source input instead of the RGB channels. In this case the glows will not pick up color from the source and will typically be brighter. Values between 0 and 1 interpolate between using the RGB and the Alpha.

Light Back:   Default: 0,  Range: 0 to 1,  Shared.
Increase this to give a look of the glow casting light onto the background image. To see this more clearly you can also lower the Scale Background parameter or raise the Brightness parameter.

Comp Premult:   Check-box,  Default: off,  Shared.
Enable this for a better composite if the Front pixel values have been pre-multiplied by the Matte pixel values. This is also known as an 'additive' composite.

Show:   Popup menu,  Default: Result.
Selects the type of output

Result:  Shows the final result of combining the glow, source, and background.

Threshold:  Shows the thresholded image that is used to generate the glow.

Combine:   Popup menu,  Default: Screen.
Determines how the glow is combined with the Source or Background. This parameter has no effect if Light BG is set to 1.

Mult:  the source or background is multiplied by the glow.

Add:  the glow is added to the source or background.

Screen:  the glow is blended with the source or background using a screen operation.

Difference:  the result is the difference between the glow and the source or background.

Overlay:  the glow is combined with the source or background using an overlay function.

See Also:

GlowComp GlowDistComp GlowAuraComp GlowRingsComp GlowDarksComp GlowOrthiconComp GlowEdgesComp GlowNoiseComp

GlowRainbow GlowRainbowMask GlowRainbowMaskComp

Glint PsykoStripes PseudoColor

Sapphire Plug-ins Introduction

© 2010, GenArts, Inc. All rights reserved.