EmbossShinyMask In the S_EmbossMask Plugin. Embosses the Source clip using the Bumps input as a relief map. A lighting model is used which includes highlights from specular reflections. Similar to EmbossShiny, but only applies the effect to areas specified by a Mask input. Inputs: Source:  The clip to be processed. Bumps:  The bump map for the emboss. Only the luminance of this input is used. Mask:  The emboss is applied only at the areas specified by this input. Only the red channel of this input is used. This input can optionally be blurred or inverted using the Blur Mask or Invert Mask parameters.

Parameters:

Light Dir:   X & Y,   Default: [0.3 0.3],  Range: any,  Shared.
The direction vector for the light source. Surface shading is calculated using light from this direction shining onto the Bumps input. This parameter can be adjusted using the Light Dir Widget.

Bumps Scale:   Default: 1,  Range: any,  Shared.
Scales the amplitude of the bump map.

Bumps Threshold:   Default: 0,  Range: 0 or greater,  Shared.
This value is subtracted from the Bumps input before it is used.

Bumps Smooth:   Default: 0.01,  Range: 0 or greater.
If positive, the Bumps input is blurred by this amount before being used. Increase for a softer emboss effect.

Subpixel Smooth:   Check-box,  Default: off,  Shared.
If enabled, the amount of pre-smoothing of the Bumps input is performed at subpixel accuracy. It can be helpful if Bumps Smooth is very small or is being animated. This parameter has no effect unless Bumps Smooth is positive.

Hilite Brightnss:   Default: 0.8,  Range: 0 or greater.
Scales the brightness of the specular highlights.

Hilite Size:   Default: 0.5,  Range: 0.1 or greater.
Adjusts the size of the specular highlights.

Brightness:   Default: 1,  Range: 0 or greater,  Shared.
Scales the brightness of the result.

Light Color:   Default rgb: [1 1 1],  Shared.
The color of the light source that creates the embossed result.

Blur Mask:   Default: 0,  Range: 0 or greater,  Shared.
Blurs the Mask input by this amount before using. This can provide a smoother transition between the masked and unmasked areas.

Invert Mask:   Check-box,  Default: off,  Shared.
If enabled, inverts the mask input so the effect is applied to areas where the Mask is black instead of white.

See Also:

EmbossMask EmbossDistortMask EmbossGlassMask

EmbossShiny

TextureNoiseEmboss Sapphire Plug-ins Introduction

© 2010, GenArts, Inc. All rights reserved.