FieldRemove: Deinterlace In the S_FieldRemove Plugin. Deinterlaces video fields into frames while maintaining sharp results in still areas of the frame. This doubles the number of frames for a 1/2 speed result, so you should normally set your output frame number to twice the input clip length. A 'Motion Matte' is generated internally and the moving areas are deinterlaced with the usual loss of vertical resolution, but the stationary areas of the image are not deinterlaced and should remain sharp. Inputs: Source:  The clip to remove flicker from.

Parameters:

Scale Mo Matte:   Default: 4,  Range: 0 or greater,  Shared.
Increase to remove more field artifacts, or decrease to remove fewer and keep the image sharper.

Threshold Matte:   Default: 0.05,  Range: 0 or greater,  Shared.
This value is subtracted from the Motion Matte and can be increased to reduce unwanted deinterlacing due just to noise.

Blur Mo Matte:   Default: 0.1,  Range: 0 or greater,  Shared.
Determines how much the Motion Matte is smoothed out to avoid sharp transitions between the interlaced and deinterlaced areas.

Show:   Popup menu,  Default: Result.
Selects the output option.

Result:  output the deinterlaced result normally.

MotionMatte:  this allows viewing the Motion Matte itself, and can be helpful when adjusting the other parameters above.

Field Dominance:   Popup menu,  Default: 1.
Selects the ordering of the output fields.

1:  field 1 is first in time.

2:  field 2 is first in time.

See Also:

FieldRemove NTSCtoFilm DeinterlaceAuto

FieldTool GetFrame DeinterlaceAuto

Sapphire Plug-ins Introduction

© 2010, GenArts, Inc. All rights reserved.