CloudsPsyko In the S_Clouds Plugin. Generates a procedural noise texture, and passes this through a colorizing process. The Shift Speed parameters cause the pattern to automatically translate over time, and Phase Speed causes the colors to rotate over time. Inputs: None

Parameters:

Frequency:   Default: 2,  Range: 0.01 or greater.
The spatial frequency of the clouds. Increase to zoom out, decrease to zoom in. Very high values of Frequency are clamped internally so the grain size is no smaller than a few pixels. If you want even finer grain use S_Grain or S_Clouds:Perspective instead.

Frequency Rel X:   Default: 0.4,  Range: 0.01 or greater.
The relative horizontal frequency of the texture. Increase to stretch it vertically or decrease to stretch it horizontally.

Octaves:   Integer,  Default: 8,  Range: 1 to 10.
The number of summed layers of noise. Each octave is twice the frequency and half the amplitude of the previous. A single octave gives a smooth texture. Adding octaves makes the result approach a fractal (1/f) noise texture.

Seed:   Default: 0.23,  Range: 0 or greater.
Used to initialize the random number generator. The actual seed value is not significant, but different seeds give different results and the same value should give a repeatable result.

Shift Start:   X & Y,   Default: [0 0],  Range: any,  Shared.
Translation offset of the texture. Since the texture is procedurally generated it can be shifted with no repeating units or seams occurring.

Color Freq:   Default: 4,  Range: 0 or greater.
The frequency of the color pattern. Increase for a busier texture with more cycles through the spectrum.

Freq Red:   Default: 1,  Range: 0 or greater.
The frequency of the red color component. Increase for more cycles in the red channel.

Freq Green:   Default: 1.1,  Range: 0 or greater.
The frequency of the green color component. Increase for more cycles in the green channel.

Freq Blue:   Default: 1.2,  Range: 0 or greater.
The frequency of the blue color component. Increase for more cycles in the blue channel.

Phase Start:   Default: -0.5,  Range: any.
The phase offset of the color patterns.

Shift Speed:   X & Y,   Default: [0.5 0],  Range: any,  Shared.
Translation speed of the texture. If non-zero, the result is automatically animated to shift at this rate. The result of animated Speed values may not be intuitive, so for variable speed motion it is usually best to set this to 0 and animate the Shift Start values instead.

Brightness:   Default: 1,  Range: 0 or greater.
Scales the brightness of the result.

Scale Color:   Default rgb: [1 1 1].
Scales the color of the result. For example, if it is yellow [1 1 0], the blue of the result will be 0.

Saturation:   Default: 1,  Range: 0 or greater.
Scales the strength of the colors. Increase for more intense colors, or decrease for muted colors.

Offset:   Default: 0,  Range: any.
Adds this gray value to the result (or subtracts if negative). 0 has no effect, .5 is middle gray, and 1 is white.

Phase Speed:   Default: 0.3,  Range: any.
The phase speed of the color patterns. If non-zero, the phase is automatically animated to give the color pattern a boiling look.

See Also:

Clouds CloudsPerspective CloudsVortex CloudsMultColor CloudsColorSmooth

CloudsPsykoComp

ZebrafyColor PseudoColor PsykoBlobs PsykoStripes

Sapphire Plug-ins Introduction

© 2010, GenArts, Inc. All rights reserved.