S_EdgeDetectDouble Performs an edge detect operation twice giving a double stranded edge effect. Increase the Edge Smooth parameters for thicker edges. In the Sapphire Stylize effects submenu. Inputs: Source:  The clip to be processed.

Parameters:

Edge Smooth1:   Default: 0.022,  Range: 0 or greater.
Increase for smoother edges for the first edge-detect.

Edge Smooth2:   Default: 0,  Range: 0 or greater.
Increase for smoother edges for the second edge-detect.

Subpixel Smooth:   Check-box,  Default: off.
Enables smoothing the edges by subpixel amounts. Use this for smoother animation of the Edge Smooth parameter.

Brightness1:   Default: 1,  Range: 0 or greater.
Scales the brightness of the initial edges.

Brightness2:   Default: 1.5,  Range: 0 or greater.
Scales the brightness of the result.

Saturation:   Default: 1,  Range: 0 to 10.
Scales the color saturation of the result. Increase for more intense colors. Set to 0 for monochrome.

Threshold1:   Default: 0,  Range: 0 or greater.
Subtract this value from the initial edges.

Threshold2:   Default: 0,  Range: 0 or greater.
Subtracts this value from the result. Increase to remove unwanted noise from minor edges.

Show:   Popup menu,  Default: Edges2.
Selects the output option.

Edges1:  shows just the first edge-detect. This can be useful for adjusting the Edge1 parameters without performing the second edge-detect.

Edges2:  shows the result of the double edge-detect.

See Also:

EdgeDetect EdgesInDirection EdgeColorize

BandPass Sharpen

Sapphire Plug-ins Introduction

© 2009, GenArts, Inc. All rights reserved.