S_ChannelSwitcher Reorders the RGBA channels of the source clip. Allows mapping any source channel into any output channel, with scaling and offset for each output channel. In the Sapphire Adjust effects submenu. Inputs: Source:  The clip to be processed.

Parameters:

Red <-:   Popup menu,  Default: Red.
Selects which channel of the source to use as the output red channel.

Red:  Use the red input channel as the source for this output channel.

Green:  Use the green input channel as the source for this output channel.

Blue:  Use the blue input channel as the source for this output channel.

Alpha:  Use the alpha input channel as the source for this output channel. If the input has no alpha, uses 1 (fully on).

Luma:  Use the input luminance as the source for this output channel.

1:  Use a constant 1 value (fully on) as the source for this output channel.

0:  Use a constant 0 value (fully off) as the source for this output channel.

Green <-:   Popup menu,  Default: Green.
Selects which channel of the source to use as the output green channel.

Blue <-:   Popup menu,  Default: Blue.
Selects which channel of the source to use as the output blue channel.

Alpha <-:   Popup menu,  Default: Alpha.
Selects which channel of the source to use as the output alpha channel.

Scale Lights Red:   Default: 1,  Range: -2 or greater.
Scales the brightness of the output red channel by this amount.

Scale Lights Green:   Default: 1,  Range: -2 or greater.
Scales the brightness of the output green channel by this amount.

Scale Lights Blue:   Default: 1,  Range: -2 or greater.
Scales the brightness of the output blue channel by this amount.

Scale Lights Alpha:   Default: 1,  Range: -2 or greater.
Scales the brightness of the output alpha channel by this amount.

Offset Darks Red:   Default: 0,  Range: -8 to 2.
Adds this value to the darker regions of the red output channel. This can be negative to increase contrast.

Offset Darks Green:   Default: 0,  Range: -8 to 2.
Adds this value to the darker regions of the green output channel. This can be negative to increase contrast.

Offset Darks Blue:   Default: 0,  Range: -8 to 2.
Adds this value to the darker regions of the blue output channel. This can be negative to increase contrast.

Offset Darks Alpha:   Default: 0,  Range: -8 to 2.
Adds this value to the darker regions of the alpha output channel. This can be negative to increase contrast.

Output Premult:   Check-box,  Default: off.
If enabled, the output RGB is scaled by the output alpha. Where the output alpha is zero, the final RGB output will be zero.

See Also:

HueSatBright Monochrome ClampChroma PseudoColor DuoTone TriTone QuadTone Tint Threshold Hotspots Gamma Solarize ShowBadColors Invert

Sapphire Plug-ins Introduction

© 2009, GenArts, Inc. All rights reserved.